01 Ağu
GLADIATOR

GLADIATOR

NEW SOLUTIONS IN ANTI-COROSSION COATING INDUSTRIES

GLADIATOR, The Most Effective Technology to Prevent Surface Degradation

The Gladiator System consists of a portable unit which is applied by flame spraying of thermoplastic powders for corrosion prevention.Termoplastic Yüzey Kaplama sistemleri

Gladiator:

Thanks to the following features, it provides a wide range of applications in different fields:

  • In small size
  • Portable
  • Easy-to-Use
  • High flow capacity for high rate application

Termoplastic Yüzey Kaplama sistemleri

The system, which is used with propane gas, LPG and compressed air, has various accessories according to the nature of the work.

  • It has three different application guns for working in small or hard-to-reach areas as well as high capacity applications in large areas.
  1. Standart gun for middle size fields
  2. High capacity gun for large fields
  3. Small pistol with pistol grip and trigger mechanism especially suitable for the repair of joints and bends covered with polypropylene.
  • It has additional heating systems that are useful for coating thick parts or for applications in very cold climates.
    Termoplastic Yüzey Kaplama sistemleri

    Termoplastic Yüzey Kaplama sistemleriThe system is resistant to sun, sand, salt, water and substances and chemical agents that cause widespread air pollution. It provides long-term anti-rust coating that is resistant to impacts, low temperatures and UV rays. The product can be applied without using primer. Excellent consistency in color is guaranteed. Gladiator has a wide range of applications in various sectors;

    CONTINUOUS INSULATION

  • Separation from existing protective coating in underground structures
  • Protection against electro and marine corrosionTermoplastic Yüzey Kaplama sistemleri

OSMOTIC AND CORROSION BARRIERTermoplastic Yüzey Kaplama sistemleri

Buildings and bridges, offshore structures and marine applications.

Termoplastic Yüzey Kaplama sistemleri

CHEMICAL RESISTANCE, PROTECTION OF METAL SURFACES FROM ACID EFFECT

  • Coating with high mechanic strength  and abrasion resistance,
  • Coating for the discharge of mineral deposits and treated waste waterTermoplastic Yüzey Kaplama sistemleriTermoplastic Yüzey Kaplama sistemleri

OUTDOOR APPLICATION

Lighting poles, guardrails, fences, playground structures, swimming pools, gas / water distribution systems, food industry

Termoplastic Yüzey Kaplama sistemleri

ADVANTAGES OF APPLICATION

The Gladiator System offers numerous benefits with superior efficiency and quality performance:

  • Non-removable assembled units, in-plant or on-site applications
  • Pipes, tanks, connections and joints, general metal structures, equipment, etc.
  • Repair and restoration of thermoplastic powder coated units by other methods, Electrostatic, liquefied soil, extrusion
  • High yield, Standart Gun: At appr. 200-250 micron, up to 10 m2/h’a
  • High capacity Gun: At appr. 200-250 micron, up to 24-30m2/h
  • Versatile and flexible applications. Possibility to reach small and hard-to-reach areas
  • Usability in each type of substrate. Metal, cement and concrete, fiberglass, plastic, wood, cardboard, surface anti-slip applications
    Applicability of a wide variety of types of thermoplastics.
  • Polypropylene, polyethylene, thermoplastic powders, PolyHotCote, biliary copolymer alloys
  • Single-stage application. Direct application of thermoplastic powder to a pre-prepared (sandblasted) substrate heated by a flame gun and / or additional heating gun
  • The coating can be completely repaired and then retouched. The powder can simply be re-melted on the surface to repair the coating or to increase the thickness (without limit).

Non-Toxic and Eco-friendly Solution: It does not contain VOC, halojens, isocyanates and heavy metals, so;

  • Operator safety is provided
  • Over-spraying can be avoided
  • Enables coated units to be used without wasting time.
  • Long-term coating life: The coating life is longer than conventional systems, thus providing corrosion protection in areas where other systems will fail.
  • Application regardless of weather conditions: Flame spraying of thermoplastic powders allows the application of the coating in all weather conditions. This demonstrates the versatility of the Gladiator system.
  • Cost savings: High quality corrosion protection can be achieved with minimum downtime in field applications or large assembled structures.
  • Resistant to corrosive chemical agents / protection against corrosion and oxidation: repair, retouching and application of thermoplastic coatings of unpainted objects
28 Tem
RUST BULLET

RUST BULLET

RUST BULLET

  1. The free-swelling rust layers on the surfaces should be removed by coarse blasting and / or cleaned with a wire brush.
  2. Any old paint layers on the surface, if any, should be cleaned mechanically and / or with the aid of chemical solvents.
  3. RUST BULLET METAL BLAST should be applied by spraying on surface for free corrosion and / or cleaning of soluble salt, oil, etc. on the metal surface after paint cleaning. After waiting for a while, the solvent should be removed from the surface using warm deionized water.
  4. After this necessary preliminary procedure for surface preparation and cleaning which increases the success of the application and makes the service life of the product to be stable is completed, RUST BULLET STANDARD should be applied in two coats with the help of brush and / or roller. If a roll is to be used, it is recommended to use a short pile roller. The product should be applied to the surface by the method of forming equal amounts of parallel cross lines without forming agglomeration in a region. The first coating layer should be applied a little bit plentiful. The second and other additional layers are applied to completely cover the first layer. Before the application of second layer of RUST BULLET STANDARD, the previous layer must be in dry touch. Drying time between coating layers is about 2-4 hours. Drying time may vary depending on surface temperature and relative humidity. Sometimes this period can go down to 1.5 hours. The product is sensitive to moisture. Under high humidity conditions of 80% or more, the product will dry faster. If a 24 hour application period has elapsed, the surface should be slightly abraded with at least 150 grift of material to ensure proper adhesion of an overcoat. If the second coat is to be applied the next morning, make sure that there is no dew or condensation on the previous coat. The application surface must always be dry. For optimum performance, it must be ensured that corners, edges, and hollow areas are sufficiently covered.
  5. RUST BULLET STANDARD, the paint which is applied directly on rust, also serves as a topcoat. It provides a metallic gray finish. If a different color is desired for an aesthetic finish, RUST BULLET COLOR SHELL can be applied in 2 coats over the paint thrown directly on the rüşt.
123